To meet the stringent demands of the Dairy Industry, Goodpack provides an all-steel, galvanized IBC, fully cleaned and suitable for passing through critical hygiene areas as specified by the Dairy Industry. The Goodpack MB4 IBC has a bottom side discharge hole allowing for the gravity feed de-canting of the IBC in a liquid state or alternatively discharged from the same top filling valve. The MB5 is also constructed with the same high tensile galvanized steel, but has a larger capacity and is filled and emptied through the top valve.

Owing to the all-steel construction of the Goodpack IBC, some manufacturers preheat the Goodpack IBC in a steam room or heating tunnel rather than using internal heating elements and heating blankets in order to liquefy the product. This is far superior to other forms of packaging such as wood, fibreboard or corrugated boxes which cannot be heated in this manner. This is due to the insulating properties of the thick cardboard as well as the serious safety issues that occur as the cardboard becomes saturated with moisture and may collapse and cause injury. Heater elements are also used in Goodpack IBCs as required.

The Goodpack IBC holds 30-40% more product than other IBC types thus giving the user the advantages of improving efficiency through
· Fewer IBC set ups
· Fewer labour hours and stoppages in production
· Less product melts, time and energy
· Lower cost

Please contact your local representative if you want to know more about the possible use of Goodpack® containers for your products or if you need other support.